Acrylamide-induced alterations in lungs of mice in relation to oxidative stress indicators

The aim of the experiment was to study the influence of acrylamide (ACR) on major antioxidants in the lungs of Swiss mice. The experiment was conducted on male mice that were 8 weeks old. The mice were exposed to ACR at a single dose of 26 µg per animal, which was administered orally. Mice were anesthetized 3, 24, and 48 h after the ACR gavage. Next, histopathological and biochemical analyses of GSH concentration and the activities of SOD, GPx, and CAT were performed in the lungs. Animals exposed to ACR showed demonstrated symptoms of inflammation in lungs, hypertrophy of bronchiolar epithelium, and hyperplasia of alveolar epithelium. GSH concentration was significantly decreased 3 h after ACR gavage, which was followed by a significant increase 48 h after ACR gavage. Similarly, SOD and GPx demonstrated decreased activities 3 h after exposure to ACR, followed by increased activities 48 h after exposure to ACR. CAT activity was significantly increased 24 and 48 h after exposure to ACR. We conclude that oral exposure of mice to ACR results in alterations of lung microstructure, accompanied by the symptoms of redox imbalance.     

Catalytic destruction of 1,2-dichlorobenzene on V2O5-WO3/Al2O3-TiO2 catalyst

Studies on the catalytic destruction of 1,2-dichlorobenzene were carried out on a specially constructed semi-technical equipment whose most important element was a catalytic reactor with a monolithic catalyst in the form of 150 x 150 x 100 mm cubes. A catalyst made from cordierite with an active layer composed of Al2O3 - 64 wt%, TiO2 - 26 wt%, V2O5 - 6.6 wt% and WO3 - 3.4 wt% was used. The reactor made it possible to carry out the process in the temperature range 150-350 degrees C, at variable catalyst loading and different velocities of gas flow through the reactor. The content of 1,2-dichlorobenzene in the air was analysed by a chromatographic method. A significant effect of catalyst loading and temperature on 1,2-dichlorobenzene destruction efficiency was observed and no effect of the linear flow velocity through the catalyst on o-dichlorobenzene destruction efficiency was reported. The applied vanadium-tungsten catalyst on a monolithic carrier made from TiO2/gamma-Al2O3 revealed very good activity that resulted in an over 80% efficiency of 1,2-dichlorobenzene destruction at the temperature around 250 degrees C at a very high catalyst loading reaching ca. 8200 h(-1). Additionally, in this study the kinetics of 1,2-dichlorobenzene decomposition was determined, specifying the order of reaction and dependence of the decomposition rate constant on temperature, using a simple power-rate law model.     

Verification of the "first flush" phenomenon in mine water from coal mines in the Upper Silesian Coal Basin, Poland

Case studies of Grodziec and Siersza mines in the Upper Silesian Coal Basin confirm that mine water accumulating in and over-flowing from abandoned coal mines is subject to a "first flush" phenomenon. The accumulated products of sulphide oxidation are dissolved in the rising mine water and flushed out at concentrations several times those observed during mine operation. Following the first overflow, sulphate concentration and hydrogen ion activity decay exponentially. In the case of workings in Siersza, decay constants of -0.003 to -0.005 day(-1) are observed, corresponding to flushing times of 480 to 820 days, some 10-20 times the period required for the workings to flood. Quantities of leachable sulphur in the abandoned workings of 0.02-0.03% are adequate to explain the observed concentrations of sulphate in the first flush, and this figure is tentatively supported by laboratory analyses.     

Heart Rate Variability in Exposure to High Altitude Hypoxia of Short Duration

Abstract

The objective of the study is to attempt an evaluation of heart rate (HR) and heart rate variability (HRV) regulatory mechanisms in the presence of autonomous nervous system (ANS) components in transient exposure to high altitude hypoxia.

During 24 hrs including a stay in hypobaria, the participants had their HR continuously recorded using the Holter method. The following parameters were calculated at rest and during the stay in a thermobarochamber: spectral power in low frequency bands (LF) 0.04-0.15 Hz and high frequency bands (HF) 0.15-0.5 Hz, and the sympathetic-parasympathetic balance index LF/HF.

Under hypobaric conditions, a decrease in mean spectral power of R-R intervals was noted within both frequency ranges, compared with the study performed in normobaria. The observed differences were larger at daytime.     

Near- and mid-infrared diffuse reflectance spectroscopy for measuring soil metal content

Rapid and nondestructive methods such as diffuse reflectance infrared spectroscopy provide potentially useful alternatives to time-consuming chemical methods of soil metal analysis. To assess the utility of near-infrared reflectance spectroscopy (NIRS) and diffuse mid-infrared reflectance spectroscopy (DRIFTS) for soil metal determination, 70 soil samples from the metal mining region of Tarnowskie Gory (Upper Silesia, Poland) were analyzed by both chemical and spectroscopic methods. Soils represented a wide range of pH (4.0-8.0), total carbon (5.1-73.2 g kg(-1)), and textural classes (from sand to silty clay loam). Soils had various contents of metals (14-4500 mg kg(-1) for Zn, 18-6530 mg kg(-1) for Pb, and 0.17-34 mg kg(-1) for Cd), ranging from natural background levels to high contents indicative of industrial contamination in the region. Soil samples were scanned at the wavelengths from 400 to 2498 nm (near-infrared region) and from 2500 to 25000 nm (mid-infrared region). Calibrations were developed using the one-out validation procedure under partial least squares (PLS) regression. Mid-infrared spectroscopy markedly outperformed NIRS. Iron, Cd, Cu, Ni, and Zn were successfully predicted using DRIFTS. The coefficients of determination (R(2)) between actual and predicted contents were 0.97, 0.94, 0.80, 0.99, and 0.96 for those metals, respectively. Only Pb content was predicted poorly. Calibrations using NIRS were less accurate. Root mean squared deviation (RMSD) values were from 1.27 (Pb) to 3.3 (Ni) times higher for NIRS than for DRIFTS. Results indicate that DRIFTS may be useful for accurate predictions of metals if samples originate from one region.     

Hydrogen, carbon and sulphur isotope ratios in peat: the role of diagenessis and water regimes in reconstruction of past climates

We demonstrate that carbon, hydrogen and sulphur isotope ratios both, in the total peat (¹³C_tp=–25.52 to –28.27, D_tp=–78.67 and –109.24, ³⁴S=4.35 to 19.87), and in cellulose from the peat (¹³C_nc=–25.06 to –27.33 and D_nc=–92.43 to –118.02) are not affected by postdepositional changes. Therefore, the original isotope composition of plants are in general preserved in the peat and represent an archive of the past environmental variations. These can be supported by (i) good correlations between ¹³C_tp and ¹³C_nc, and between D_tp and D_nc, (ii) high horizontal homogeneity of ¹³C_tp and ¹³C_nc in the scale of one peat-bog – the same major factor(s) control(s) C isotopic ratios, (iii) no correlation between organic sulphur concentrations and ³⁴S value –³⁴S results from variations in the water level.This revised version was published online January 2005 with corrections to the title.     

Agricultural and non-agricultural directions of bio-based sewage sludge valorization by chemical conditioning

Environmental Science and Pollution Research - This literature review outlines the most important—agricultural and non-agricultural—types of sewage sludge management. The potential of...     

Assessing indoor air quality of school environments: transplanted lichen <Emphasis Type="Italic">Pseudovernia furfuracea</Emphasis> as a new tool for biomonitoring and bioaccumulation

The aim of this research is to evaluate the ability of transplanted lichen Pseudovernia (P). furfuracea to biomonitor and bioaccumulate in urban indoor environments. The elements As, Cd, Cr, Cu, Hg, Ni and Pb and 12 selected polycyclic aromatic hydrocarbons (PAHs) were used to assess P. furfuracea as a biomonitoring tool for the indoor air quality of school environments. To achieve this purpose, lichen samples were exposed for 2 months in the outdoor and indoor environments of five school settings located in urban and rural areas. The results demonstrated that transplanted lichen P. furfuracea is a suitable biomonitoring tool for metals and PAHs in indoor settings and can discriminate between different levels of air pollution related to urbanisation and indoor conditions, such as those characterised by school environments. A transplanted lichen biomonitoring strategy is cost-effective, “green”, educational for attending children and less “invasive” than traditional air sampling methods. The feasibility of indoor monitoring by P. furfuracea is a relevant finding and could be a key tool to improve air quality monitoring programmes in school scenarios and thus focus on health prevention interventions for children, who are one of the most susceptible groups in the population.